掘削機の油圧ポンプとメインコントロールバルブ: 本当の問題を特定するには?
This blog explains how to distinguish between excavator hydraulic pump and main control valve problems by comparing symptoms, such as whether all functions or only specific circuits are affected. It also outlines a systematic diagnostic procedure involving oil checks, filters, pressure testing, function comparison, and valve inspection.
油圧ショベル用 REXROTH (UCHIDA) AP2Dシリーズ油圧ポンプ
This guide covers the Rexroth (Uchida) AP2D series of tandem variable-displacement hydraulic pumps for 1.2–8 tonne mini and compact excavators, including AP2D12 through AP2D36 models rated at 350 bar and 3500 rpm. It provides OEM application references, cross-reference codes, and buyer guidance for sourcing exact pumps, control variants, and spare parts.
掘削機の油圧ポンプの騒音の原因は何ですか?
This blog explains common causes of noise in an excavator hydraulic pump, including air ingestion, cavitation, low or contaminated oil, worn bearings, blocked filters, and incorrect oil selection. It also outlines symptoms and preventive maintenance steps to reduce downtime and extend pump life.
液体油が 掘削機を 静かに殺す方法
This blog explains how contaminated, degraded, or water-aerated hydraulic oil from the machine's shared system can silently damage an excavator final drive travel motor through abrasive wear, lubrication loss, and cavitation. It emphasizes cascading failures and recommends filter changes, oil sampling, flushing, and root-cause repair before replacing a final drive.
適切な油圧ショベル用ファイナルドライブを一度で注文する:情報チェックリスト
This guide explains how to order the correct excavator final drive the first time by providing a detailed information checklist, including data tags, speed configuration, mounting bolt patterns, sprocket details, hydraulic ports, and a standard photo set. It emphasizes that complete information prevents wrong-part shipments and outlines how Belparts verifies OEM numbers, condition, warranty, and fitment before purchase.
掘削機 メインポンプにおける負の流量制御と交差センサー:信号流量ガイド
This guide explains how Negative Flow Control and cross-sensing regulate Kawasaki K3V/K5V excavator main pumps through Pn, Ps, Pi, and Pf signals, and compares NFC, PFC, and Load Sensing architectures. It also provides a signal-first diagnostic workflow for weak pump symptoms and aftermarket pump matching.
KAWASAKI K3V / K5V レギュレータのフィールド調整およびケースドレイン診断 SOP
This SOP covers field adjustment of Kawasaki K3V/K5V pump regulators and case-drain flow testing to diagnose weak excavator hydraulics. It includes pre-adjustment checks, Q1/Q2 setpoint procedures, volumetric efficiency interpretation, and a decision matrix for adjusting, rebuilding, or replacing the pump.